Tunnels Adapters and Cowls

GRP Tunnels	Stern Adapters	Cowls

Manufactured from fully isophtalic resin and pre-gel coated, Max Power’s high quality tunnels have the added advantage of a first coat of matt before being filament wound. Cutting and drilling can therefore be carried out without the risk of damaging the gel coat on the inside surface of the tunnel.	Also manufactured from fully isophtalic resin, Max Power’s range of stern adaptors are SMC moulded (sheet moulding compound) in a male / female steel mould. This ensures perfect resin fibre ratio and exceptional reproduction of form.	Cowls are easily fitted to the stern adaptors and allow the use of stern thrusters in relatively shallow draft applications.

Thruster Model	CT35/45	CT60/80/ CT100/125	CT165/225	CT300	CT325
Diameter	125mm	185mm	250mm	300mm	315mm
Length 500mm	0.00 US$ 42546
Length 750mm	0.00 US$ 42547	0.00 US$ 42549
Length 1000mm	0.00 US$ 313804	0.00 US$ 42550	0.00 US$ 42553
Length 1250mm	0.00 US$ 313809
Length 1500mm		0.00 US$ 42551	0.00 US$ 42554	0.00 US$ 313811	0.00 US$ 35004
Length 2000mm				0.00 US$ 313812	0.00 US$ 42557
Length 2500mm	0.00 US$ 42548	0.00 US$ 42552	0.00 US$ 42555

Thruster Model	CT35/45	CT60/80/ CT100/125	CT165/225	CT300	CT325
Stern Adapters	0.00 US$ 315389	0.00 US$ 315392	0.00 US$ 315395		0.00 US$ 35015
Stern Adapters fixation kit	0.00 US$ 35016	0.00 US$ 35016	0.00 US$ 35016	0.00 US$ 35016	0.00 US$ 35016
Cowls	0.00 US$ 315398	0.00 US$ 315399	0.00 US$ 315400

Mounting Bases

Mounting bases to suit all of our retractable thrusters are available to facilitate installation. Manufactured from isophtalic GRP, they can be easliy integrated into new builds or retro-fitted.
Aluminium yachts are catered for with suitable aluminium flanges. These are designed to be welded to the top of a mounting base constructed in the hull.

Aluminium Compact Retract	Aluminium VIP 150	Aluminium VIP 250	GRP Compact Retract	GRP VIP 150	GRP VIP 250
0.00 US$ 311362	0.00 US$ 35025	0.00 US$ 311303	0.00 US$ 313760	0.00 US$ 35026	0.00 US$ 635663